Home Categories Send inquiry

API 6A Wellhead Slab Gate Valve

FC Slab Gate Valve

Features
1.Full-bore design effectively eliminates pressure drop and eddy currents and slows down solid particles in the fluid
flushing of valves;
2.Unique sealing design, so that the switching torque is greatly reduced;
3.Metal seals are made between the bonnet and the valve body, the valve plate and the valve seat ring;
4.Metal sealing surface spray (overlay) welding cemented carbide, with good wear resistance, corrosion resistance;
5.The seat ring is fixed by the fixed plate to maintain good stability;
6.The stem is equipped with an inverted sealing mechanism to facilitate the replacement of the stem sealing ring with pressure.

FL Slab Gate Valve

Features
1.The inside of the valve body does not use any rubber as the sealing material;
2.The valve body is made by die forging compression one-time forming process;
3.The valve body, valve seat and valve plate are all metal-to-metal seals,
4.It has good sealing performance and long service life;
5.The valve stem has a back seal, and the valve stem seal packing can be replaced with pressure;
6.The valve operation switch torque is light. It can be operated by one person under pressure;
7.Spare stem safety pin protects the stem from being sheared.

PFF Slab Gate Valve

Features
1.With balanced tail stem to balance the stem load and reduce the valve rod thread and bearing load, reducing the operating torque;
2.Open rod structure, which can indicate the valve opening and closing situation;
3.The valve stem is equipped with an inverted sealing mechanism for easy replacement with pressure Stem seals;
4.A sealing grease injection valve is provided on one side of the bonnet for easy replenishment
Sealing grease to improve the sealing performance and sealing performance of valve plate and valve seat Lubricating properties

Main Technical Parameters

Size(inches) Working Pressures(PSI)
1 13/16     10000 15000
2 1/16 3000 5000 10000 15000
2 9/16 3000 5000 10000 15000
3 1/8 3000 5000    
3 1/16     10000 15000
4 1/16 3000 5000 10000 15000
5 1/8     10000 15000
7 1/16     10000 150001
Service Condition Trim Body Bonnet Gate Seat Stem
General, Non-Corrosive AA Alloy Alloy Alloy Alloy Alloy
General, Slightly Corrosive BB Alloy Alloy 410SS 410SS 17-4 PH
General, Moderately Corrosive CC 410SS 410SS 410SS 410SS 17-4 PH
Sour, Non-Corrosive DD Alloy Alloy Alloy Alloy 17-4 PH
Sour,Slightly Corrosive EE Alloy Alloy 410SS 410SS 17-4 PH
Sour, Moderately Corrosive FF 410SS 410SS 410SS 410SS 17-4 PH

API 6A Wellhead Slab Gate Valve Related Video: