Hard seal slurry valve
1. The sealing surface of the valve plate and valve seat is sprayed with cemented carbide, which has a long service life;
2. Adopt open rod structure;
3. The stem packing can be replaced without removing the valve cover;
4. The valve cover can be easily removed to check the internal parts, and the parts can be replaced without removing the valve from the pipeline.
Soft seal slurry valve
1. The valve cover can be easily removed to check the internal parts, and the parts can be replaced without removing the valve from the pipeline; Floating flat plate design: The gate valve connected to the T-slot stem allows the floating seat, and the valve seat can be sealed against the gate plate.
1.Designed specifically for abrasive and erosive condition.
2.Connection: Flange, Thread, Butt weld , Hammer Union.
3.Pressure ratings up to 5,000 psi in 2", 3",4",5"x 4" and 6" x 4" Valve Sizes.
4.Working Temperature: -46°C~ + 121°C
5.Sour Service Models to NACEMR-01-75.
6.Specification Level: PSL1~PSL4
7.Performance Requirement: PR1